Archives

  • 2026-11
  • 2026-10
  • 2026-09
  • 2026-08
  • 2026-07
  • 2026-06
  • 2026-05
  • 2026-04
  • 2026-03
  • 2026-02
  • 2026-01
  • 2025-12
  • 2025-11
  • 2025-10
  • Cy3 Goat Anti-Rabbit IgG (H+L) Antibody: Practical Workflow

    2026-07-16

    Cy3 Goat Anti-Rabbit IgG (H+L) Antibody: Technical Guidance for Research Applications

    What This Product Solves

    The Cy3 Goat Anti-Rabbit IgG (H+L) Antibody addresses the need for robust and sensitive detection of rabbit primary antibodies in immunofluorescence, immunohistochemistry (IHC), and immunocytochemistry (ICC) workflows. Conjugated to the Cy3 fluorophore, this secondary antibody enables signal amplification by binding both heavy and light chains of rabbit IgG, thus increasing the number of fluorophores per target and improving detection sensitivity. Its specificity and purity, achieved through immunoaffinity purification, are critical for minimizing background and maximizing assay clarity, especially in applications where detection of low-abundance targets is necessary. This reagent is intended exclusively for research use and is not suitable for diagnostic or therapeutic procedures.

    Several internal resources provide context and protocol details for this antibody. The Protocol and QC Guide details best practices for ensuring high sensitivity and low background, while the article in Cancer Polarity Research demonstrates advanced use of the antibody in immunofluorescence-based cancer cell polarity studies.

    Protocol Parameters

    • Assay: Immunofluorescence (IF) | Value: 1-10 μg/mL (workflow recommendation) | Applicability: Start with 2 μg/mL, titrate as needed based on primary antibody abundance | Rationale: Optimizing secondary antibody concentration reduces background and enhances signal | workflow recommendation
    • Assay: Immunohistochemistry (IHC), Immunocytochemistry (ICC) | Value: 1 mg/mL stock concentration (product spec) | Applicability: Stock provided at 1 mg/mL for dilution into working solutions; do not use undiluted | Rationale: High stock concentration enables precise dilution control | product dossier
    • Assay: All fluorescence-based applications | Value: Protect from light during storage and use (workflow recommendation) | Applicability: Cy3 fluorophore is light-sensitive | Rationale: Prevents photobleaching, preserves detection sensitivity | workflow recommendation
    • Assay: Storage | Value: 4°C (≤2 weeks), -20°C (≤12 months), avoid freeze/thaw | Applicability: Short- and long-term storage; aliquot to minimize freeze/thaw cycles | Rationale: Maintains antibody stability and fluorescence integrity | product dossier

    Workflow Setup and QC Checklist

    • Aliquot upon arrival: To prevent repeated freeze/thaw cycles, immediately aliquot the antibody into single-use volumes suitable for your typical experiment size. Store working aliquots at 4°C (short-term) or -20°C (long-term, up to 12 months).
    • Light protection: Use amber tubes or wrap vials in foil. Perform all handling and incubation steps in low-light conditions to preserve Cy3 fluorescence.
    • Blocking and washing: Include 1% BSA or appropriate serum in blocking and antibody dilution buffers to minimize nonspecific binding. Wash samples thoroughly to reduce background signal.
    • Secondary-only control: Always include a control lacking primary antibody to distinguish specific signal from background due to secondary antibody binding.
    • Microscopy/filter setup: Ensure fluorescence microscope filters are compatible with Cy3 excitation (550 nm) and emission (570 nm) spectra to detect signal effectively.
    • Documentation: Record lot numbers, dilution factors, incubation times, and deviations from standard protocol to support reproducibility and troubleshooting.

    Common Failure Modes and Fixes

    • High background fluorescence: May result from excessive antibody concentration, insufficient blocking, or inadequate washing. Titrate the secondary antibody, optimize blocking conditions, and increase wash stringency.
    • Weak or no signal: Could be due to photobleaching, expired or improperly stored antibody, or suboptimal primary antibody binding. Protect all reagents and samples from light, verify storage conditions, and confirm primary antibody performance.
    • Non-specific staining: Evaluate blocking reagent composition. Increase blocking time or switch to a different blocking agent if persistent. Confirm secondary antibody specificity by running controls without primary antibody.
    • Cross-reactivity or bleed-through: If multiplexing, ensure other secondaries have non-overlapping fluorophores and that filter sets are appropriately selected for Cy3.

    Scope and Limitations

    • Intended use: This antibody is formulated for research use only in immunofluorescence, IHC, and ICC workflows requiring detection of rabbit IgG with Cy3-conjugated secondary antibody.
    • Not for diagnostic/therapeutic use: The reagent is not validated for clinical diagnostics or therapeutic applications.
    • Fluorophore restriction: Cy3 is the only detection channel supported; do not use in protocols needing alternative fluorophores.
    • Species specificity: Designed for rabbit IgG detection; cross-reactivity with other species' immunoglobulins has not been established.
    • Photostability: Cy3 is sensitive to photobleaching; rigorous light protection is mandatory throughout storage and workflow.

    Conclusion

    The Cy3 Goat Anti-Rabbit IgG (H+L) Antibody from APExBIO is a well-defined secondary antibody for sensitive and specific detection of rabbit IgG in immunofluorescence, IHC, and ICC applications. Adherence to best practices in storage, handling, and protocol optimization is essential for consistent signal amplification and low background. For application-specific guidance and troubleshooting, refer to detailed internal articles or the official product page. Proper use of this reagent facilitates high-quality imaging and reliable quantitative results in fluorescence-based immunoassays.